SPL's IRON Mastering Compressor

 
 I can't wait to audition SPL's IRON Mastering Compressor. I'm quite sure it sounds as impressive as it looks. Despite its "mastering" designation It will definitely be put to use in many recording studios and mixing suites. It comes in 2 colors but featurewise they're exactly the same.


From the manual: 

"The IRON mastering compressor is not a copy of a classic unit, but rather an original concept in itself. Our goal was to conceive a compressor that provided a pleasant, melodic-sounding, transparent compression, inspired on the vintage compressors of the radio era. And we wanted it to be versatile enough to adapt perfectly to the needs of modern mastering studios.
Thus, the Iron combines not only the sonic virtues of legendary vintage tube compressors with the advantages of the High Dynamic 120V operating voltage in a single unit. It also sets a new benchmark in terms of tube compressor technology, with the innovative implementation of a parallel dual-tube circuit. Thanks to the especially conceived Mu-Metal iron transformers, the signal of each channel is split across two different twin-triode tubes. The combination of the different response curves of both tubes results in a transparent and musically pleasant compression. Additionally, peak signals of the control voltage are limited by a feed-forward resistive opto-isolator. Thus, the output signal remains lively even with a high gain reduction. The compression is only noticeable with extreme settings.
But mastering is not the only domain where the IRON sets new standards. It can also be used to process individual instruments, like vocals, bass, guitar, strings, etc. The IRON is also an excellent option for subgroups."

SPL's teaser video on the IRON Mastering Compressor:






and a video by Sound On Sound Magazine at Musikmesse 2015:




FEATURES: 

• Variable bias tube compressor
• Parallel dual tube circuit
• Tube selection and pairing with Weigl Roe Test
• Specially conceived Mu-Metal iron transformers
• Feed-forward resistive vactrol-opto-isolator
• Six different Rectifier settings available
• Sidechain that allows you to choose between Off, four sidechain-filter presets or an external sidechain signal.
• All functions can be adjusted via switches or, in the case of the Threshold, with a detented potentiometer
• In Link mode, the Threshold, Tube Bias, Attack, Release, and Rectifier parameters, as well as the Sidechain EQs, are controlled with the right side (channel 2) of the unit.
• Additional passive 120V equalizer with two presets
• High Dynamic 120V operating voltage
• Auto Bypass mode
• Made in Germany

SPECIFICATIONS:

• Frequency Range: 10Hz - 40kH
• CMRR (@ 0dBu) 1kHz: › 80dB / 10kHz: › 65dB

• THD&N (@ 0dBu) › 82dB

• Noise (A-weighted) - 98dBu

• Total Harmonic Distortion 0.06 % @ 1kHz/-10 dBu; 

• 0.01 % @ 1kHz/0 dB; 0.002% @ 1kHz/+10 dBu

• Input Impedance 20 kOhm

• Max. Input Level + 32.5dBu

• Output Impedance ‹ 50 Ohm

• Max. Output Level + 32.5dBu

• Power Consumption: max 45W

• Fuses 230 V/50 Hz: 1 Amp, 115 V/60 Hz: 2 Amp

• Dimensions 482 x 177 x 311.5 mm, (19“ x 7“ x 12.25“)

• Weight 11 kg / 24.25lb

MSRP: 4,158.82 €€/4,719.82 USD

Freebie Fri.: The U-He TyrellN6

Don't be fooled by the term "freeware" when it comes to the u-he TyrellN6. It is a full fledged soft synth designed at the behest of Amazona.de, a German Online Magazine.


From u-he's website:

"A reader survey and follow-on forum posts provided a pool of ideas for a low-cost HARDWARE analogue synth, which Mic 'Moogulator' Irmer collected and used to develop quite a powerful concept. Based on a design similar to Roland's classic Juno 60, a few modules and novel features could be added without making the product too expensive...
However, it soon became obvious that developing the hardware would have taken years, so I (Urs) offered to turn the core design into a freeware softsynth. That was late 2010. Only a few weeks later, TyrellN6 was out for beta testing! After some serious bug-fixing and fine tuning, the final release version became available in April 2011. "

I downloaded and tried the TyrellN6 on a project and was impressed with the quality and quantity of infinitely tweakable patches that are included.

TyrellN6 features:

• new skin designed for Amazona.de by Ryo Ishido
• smooth overdrive in the oscillator mixer
• filter output can be fed back into the mixer
• unison mode, with voice index modulation source
• envelopes can be looped or triggered via LFO
• envelopes retrigger just like classic hardware

System Requirements:

• Current PC or intel Mac
• Multicore CPU with SSE2
• (Sandy Bridge architecture or newer recommended)
• Mac OSX 10.5 or newer
• Windows XP/Vista/7/8
• 1GB RAM, more recommended
• 30MB free disc space
• display 1200x800px and up
• OSX: VST2 or AU compatible host software
• Windows: VST2 compatible host software
• Supports 32bit and 64bit in all formats
• Pro Tools AAX in development

The TyrellN6 can be downloaded here (scroll down till you see the Mac and Windows versions links. Additional patches/soundsets are also available on the same page.)

Make sure to check out the other excellent products offered on u-he's website.

The Bettermaker C502V: 500 series 3-in-1 VCA based 2 Channel Compressor.

                                             Bettermaker C502V compressor

   Bettermaker is a manufacturer known for making great sounding innovative gear such as the Bettermaker EQ230P Analog EQ and BetterMaker 502P - 500 series Analog EQ. Both with Digital Recall. They recently announced on Facebook the newest addition to their family - the C502V 3-in-1 VCA based 2 channel Compressor. The C502V will be showcased at the 139th AES 2015 NYC show. It can be run in stereo, Dual or M/S mode with digital recall of all settings. It also has 3 different compression modes.

Bettermaker C502V Features:

• 3 in 1 compressor- 3 different modes of compression, one original and two based on classic designs.
• 500 series
• Stereo/Dual Mono/MS (with solo function)
• Digital recall via USB (as always)
• Plugin control in all popular formats
• 399 onboard presets
• onboard UNDO function
• USB side chain (you can use the side chain just like in a plugin, no physical I/O needed)
• On board high pass side chain with selectable frequencies
• Lookahead mode for analog compression
• Wet/Dry for both channels
• Full parameter automation
• 1:2 ratio for Expansion, Transient designing
• Unit to unit Internal linking. You do not need USB cables hanging, or any special enclosure. Modules will connect with each-other as long as they are inserted side by side.
• Pricing:TBA

A little about the different compression modes:

BM:

• This will be the most gentle mastering compression mode but with very unique attack behavior.
• It will be fit for the widest range of settings. 
• It is great on Drums, Mix Buss. 
• It will introduce slower attacks and moderate release plus auto release.

SG mode.

• This will be inspired by the classic British VCA buss compressor,
• similar parameters
• same ease of use
• It will have all additional functions mentioned above vs. the original.

DX:

• Classic aggressive compression based on a classic 160A, so loved on drums.
• Attack and release parameters will not display
• It will have all additional functions mentioned above vs. the original.

   Bettermaker will be located in the Trans Audio Group Booth 935 where you can audition the C502V and all their other gear.

UAD Fairchild Tube Limiter Collection Tips (all EQs & Compressors on sale for 60% off).

Model 660

Model 670

    
 I didn't do a Tech Tues. post yesterday so I decided to post it today especially since the UAD Fairchild Tube Limiter collection is on sale ($99) and all UAD EQs and Compressors are on sale for 60% off for the month of October.

    Here's UAD's video on the Fairchild Collection which shares some good tips on using both the 660 and the 670 in various ways:



 
     You can read my previous post on the Fairchild Tube Limiter and Maag EQ4 here.

For more info visit Uaudio.com

What do you think of the new MPC Touch?

    Akai has announced the MPC Touch which has the same attributes as their classic drum machines but now with a touchscreen. I'm a MPC fan but I'm used to the "ol' skool" 3k/2k/4k series. However I'm open-minded especially when it comes to creative tools. I hope to audition one soon to see how well the touchscreen is implemented.

"The new MPC Touch revolutionizes the art of music production by combining professional grade hardware worthy of carrying the MPC shield with a hyper-intuitive multi-touch screen. The result - the most immersive music producing experience to date."

   Check out the videos below and give me some feedback. Thanks:










Visit MPCTouch.com for more info.

Tech Tues.: Get Great Guitar Sounds With UAD Plugins.

   I came across a great article by Rich Tozzoli on Ask Audio Magazine called "Making the Most Out of Guitar Effects In The Box". Rich shares different ways you can achieve a good guitar sound using various plugins. I'm familiar with all the plugins mentioned in the article and there are some insightful gems; so I decided to do a post on using plugins to get a great guitar sound.

   For instance Rich wrote:

   Altiverb - "Adding a touch of Magnatone 480 or BX22E spring reverb will give it added depth and reality, almost like you were tracking through a real amp with a good verb on it. One trick that I do is pan the stereo reverb directly on top of the mono guitar, so that it sounds like a miked up amp."

   I now use the UA AKG BX 20 Spring Reverb plugin which wasn't available when the article was written.

    Here's a video by UA with some great tips on using the AKG BX 20 plugin:
           


   He also mentions the UAD Dimension D which is one of my favorites. I used the hardware on many mixes over the years and now use the plugin on almost every mix. The Dimension D is a very simple but effective spatial chorus effect. (Tip: Hold down shift to combine modes e.g. 1+3 etc.)

    Here's a videoof the Dimension D being used on multiple sounds (via Russ Hughes):




                 
   Note: Sadly UA is no longer selling the Dimension D but will still support it on the UAD-2 platform. They recommend  the MXR Flanger/Doubler which is another exceptional spatial effects plugin.





  Another chorus plugin that I like to use on guitars (it also works great on keys, pads etc.) is the BOSS® CE-1 Chorus Ensemble Plug-In. It is also discontinued but still supported.


Check out this quick demo video of the CE-1(via CowCarMusic):

 
UA also has some great Guitar Amp plugins such as the Chandler Limited GAV19T

  
  Here's a great video with Pete Thorn showing how he was able to get sounds for his guitar using the UA Apollo and UAD plugins such as the Chandler Limited GAV19T and one of my favorite delays the EP-34 Tape Echo Plug-In. 

I've used both on mixes to bring guitar, synths and organ tracks to life:

Mix Mondays: Kardinal Offishall - Baby It's U!

                       

  Earlier this year I got a DM on Twitter from my "bredrin" Kardinal Offishall stating that he had some songs that needed to be mixed for his upcoming project. I took one listen and instantly agreed. I like the energy and fun loving attitude of the song and approached the mix from that perspective. I actually made the bassline and vocals the focal point then built everything else around them.  The song was mixed ITB with Avid Protools on a Macbook Pro,  Metric Halo 2882 interface and a UAD Satellite. It was well recorded and arranged so I was able to jump right into the mix. I focused on enhancing the sound and feel of the record.

  I used the UA Neve 88rs plugin on the bass:

  The MH Channelstrip 3 on vocals:

  

and The UA Shadow Hills Mastering Compressor on the stereo buss just for sonic glue (the meters barely moved).: 

 I don't like squashing the master buss but have no  problem decimating individual tracks if needed.


  On drums I used the UAD SSL-E Channelstrip.

Kick:

Snare:

  and the reverb is the UA EMT 140 Plate reverb plugin:

Freebie Fri.: Drumdrops 60s Rogers Pop Kit

Drumdrops is a company that provides multiple styles of drum tracks and sample kits.
In exchange for signing up on their website they offer a free 60's style drum pack and 20%
off coupon for future purchases.

The kit is provided in a Multi-track session format, a Stems and Mix files Pack, a Loops Pack and a Single Hits Pack. The drums were recorded at The Bridge and mixed at The Square both located in the UK. The high quality sounds can be used as is or feel free to process to your liking with your favorite gear or plugins. Even though it says "60s" I can definitely see this kit being used on various styles of music.

From the website:

"Recorded on a lovely old Rogers kit from the era and mic'd up old style in a dry sounding booth, these samples will help add an authentic 60s vibe to your songs, soundtracks and commercials.

The kit we used is a Rogers PowerTone from the late 1960s and consists of a 22” kick drum, 13” rack tom and 16” floor tom. Perfect for the sound we were after. We used two snare drums, a 1960s Ludwig 400 (again!) as it is such a classic and  a Ludwig 1950s classic Buddy Rich model. 

The kit was tuned up and prepared by London session drummer Tim Weller with Drumdrops engineer Ben Thackeray. Session drummer Jonathan Atkinson was the drummer on sampling duties. The Rogers was recorded during the same session as the Swinging 60s Pop Drops Volume 1 drum tracks album, so you can hear exactly how the non sampled kit sounds there. We used one of the smaller studios at our disposal, Miloco's The Bridge (where the kit resides) which has a very small live space which was perfect for the sound of this kit. The kit was recorded with minimal microphones (a Kick, snare and 3 kit mics) which helps with the sound.

The Single Hits pack  comes with 10 patches for different samplers and includes three velocities of each articulation. The patches included are for Battery 3, Kontakt 5, EXS24, Maschine, Geist, Studio One's Impact Soundset, Ableton Drum Rack, iDrum, Renoise and Reason Refills but if you run any legacy drum machines such as Akai MPC60s this pack may be ideal as it includes 16 bit WAVs as well as 24 bit WAVs. This pack comes loaded with 138 samples."

Head over to Drumdrops.com,  sign up, get your free drum pack and check out the many sample packs they have to offer.

Mac OSX 10.11 El Capitan Compatibility Update Compilation

Russ Hughes of Studio-One-Expert posted an extensive list of links to many of the manufacturers concerning Apple's latest OS X update "El Capitan". Universal audio is not mentioned so I went to their site. The initial tests suggest that the firewire Apollos and Satellites are not compatible but the Thunderbolt units seem to be compatible.  UA does not recommend updating to "El Capitan" at this time.

You can check the entire list here.

Tech Tues.: How to Add a Custom Tonal Reverb to Your Mix

I saw this on the Recording and Mix Engineers community on Google+ and thought I should share it. It's another great post by Eric from The Pro Audio Files. This time he shows how to create a custom reverb sound with your own impulse response. I can see this technique being used not just for mixes but to create custom sounds/atmospheres in Post Production for games, movies etc.





What do you think? Would you use this technique in your own mixes
and/or productions?

Tech Tues.: Stereo imaging and Ambience Enhancement with the UAD Precision K-Stereo.

   I wanted to do another post on stereo imaging since I've been using the UAD Precision K-Stereo Ambience Recovery plugin on some of my projects lately. The K-Stereo plugin is based on the hardware designed by world renown mastering engineer Bob Katz (who I had the great pleasure of meeting last year). Even though it was designed for mastering purposes I find it quite handy as a mixing tool.

  The K-Stereo works on the concept of mid-side enhancement and ambience recovery. It enhances the soundstage and stereo image without ruining the phase. The best way I can describe it is it makes the tracks more 3-D. The plugin can work on individual tracks and aux busses (works well on the background vocals buss) but really shines on the Master Buss. The K-Stereo is very simple to use and a little goes a long way. The AMBIENCE FILTERS section only affects the 'wet" signal and only when the "RECOVER" button is lit. This allows the user to tailor the frequency response of the ambience. Note the K-Stereo does not add artificial ambience but just enhances the inherent "space" already in the material.

  Take a look at this video with Mr. Katz demonstrating what the UAD K-Stereo does:

   And here's a quick video review of the K-Stereo plugin by Russ over at Protools Expert:

  A few years ago I did a post on stereo imaging tips which feature both hardware and software stereo imagers. The tips are a part of my daily mix routine.

Ground Control Deluxe MKII and the Wooly Mammoths.

I've been searching for a good passive monitor controller for my mobile studio setup and came across the Mammoth Cave Audio website. Their controllers look very solidly built, have great features and are reasonably priced. As stated on the site the Ground Control Series have a "Fully passive monitoring path with no active components to color your sound."  

$599

$599

$615.99

Features:

• 3 pairs of stereo inputs (2 rear, 1 front), 3 monitor pair outs, parallel/sub output.
• high quality stepped volume attenuator with precision 1% resistors for finest quality clean stepped gain control.
• Alps rotary selectors for source switching.
• Individual mutes for L/R and sub
• 3rd input is an “aux/client in”, which is a front/top access 1/8″ stereo input for every time a client wants us to hear something from their phone or laptop. I added this because I swear these days, clients always are saying “we are going for something like this…” and then they pull up some file on their phone.
• A braided white 1/8″ aux cable is included.
• All rear inputs and outputs are 1/4″ TRS and generally can be seamlessly used with any combo of balanced and unbalanced gear (units use balanced TRS input, unbalance internally and re-balance on the outputs for easy configuring with all types of source and monitor combos without introducing any added ground noise).
• Headphone amp (my take on a simplistic minimal signal path design that the hi-fi crowd raves about). While it’s not designed to be a ridiculously loud amp, it is designed to be clean and accurate.
• Quality VU meters for source monitoring (console version available without VU option)

There are also standard versions which are the "same as the Deluxe, but eliminates the headphone amp, meters, phase switch, and individual L/R mutes (still has mute all, separate mute for sub/aux out) and features stepped attenuator, 3 in, 3 out, sub out, and mono switching. Available in 1U rack-mount or console versions."

$279.99

$279.99

There's even a Micro Version for those who don't need the additional features of the Standard or Deluxe models:

$225.99

For the ultimate in portability without sacrificing sound quality there's the Attenuator Plus:

$92.99

If you already have a monitor Controller but need a Source/Monitor Switcher try the Three to Three:

$195.99

Mammoth Cave also has what they call the Passive/Aggressive Series nicknamed the "Wooly Mammoth" that is described as a "Passive Harmonic Generator". They are not monitor controllers but are made to be used inline while recording or mixing:

From the website:

"Designed to deliver some of the subtle nuances of colorful transformer based pre’s, consoles and other gear, as well as some soft clipping and saturation reminiscent of tubes, tape and other classic analog circuits getting hit hard. Diversity from subtle to all out mayhem. Deluxe version adds some additional features and filtering options.
Features the big beautiful legendary Carnhill transformers found in the classic Neve designs, as well as custom nickel wound transformers from Cinemag, steel from Edcor, and our NOS dual core transformers. Various Germanium diodes sought out for their harmonic richness and soft clipping characteristics. Some being NOS military grade sourced from Germany and Russia. Fairchild rectifiers and shottky diodes. Alps rotary channel selectors, and on the deluxe, a switchable high grade stereo stepped attenuator with premium 1% resistors.
It’s made to be subtle and add just the right amount of sparkle to overly digital recordings, but can also get pretty wooly on the germanium settings."

Sounds interesting and I would love to hear them in action. Will see if I can arrange a demo and do a more in-depth post in the near future.

Visit Mammoth Cave Audio for more info.

Tech Tues.: UAD 88rs ChannelStrip

The new UAD 88rs ChannelStrip is quickly becoming a favorite among UAD users. The original now called the legacy version was good but UA has taken the updated 88rs to a whole new level.

The 88rs is based on the Neve 88 Series Large Format Console which "is renowned for its startling depth, airiness, and clarity — deftly encompassing the best of all Neve designs that came before it. Not surprisingly, Neve 88 Series consoles are found in some of the world’s finest studios and scoring stages, including Skywalker Ranch and Capitol.
Now for the first time, you can track through an authentic emulation of this modern masterpiece — complete with its famous mic/line preamp, cut filters, dynamics, four-band EQ, plus post-fader output amplifier — exclusively for UAD-2 hardware and Apollo interfaces." One listen and you know there's some serious audio mojo going on. 

I'm currently doing two projects where I use the new 88rs in various ways. It excels on individual tracks as well as aux busses including the master.

The pic above is an actual setting I used for synth bass on a mix I did last weekend at MSR Studios.

Here's a quick tip video from UA showing how to achieve great sound with the new 88rs ChannelStrip Plugin:

I'm considering getting an Octo Satellite and 2 of the new Apollo 8Ps so I can have a virtual hybrid Neve/API/SSL console. 

For more info on the 88rs and other UAD plugins or products visit UA's website.

Tech Tues.: Producer Salaam Remi on using UAD-2 plugins when creating Hits with Alicia Keys, Nas etc.

UA has posted an article on their website with Producer/Record Exec Salaam Remi speaking about working with various artists and his use of the UAD-2 plugins. He gives insight into his production style and how he communicates with the artist during the creative process.

Here are two excerpts from the article where he mentions his favorite UAD-2 plugins:

"So even though I record through my hardware Neve 1073, I’ll still utilize the UAD Neve 1073 Preamp & EQ Plug-In Collection, the Teletronix™ LA-2A Classic Leveler Collection, and the Roland^® RE-201 Space Echo Tape Delay Plug-In. So whether I’m in New York, in my space in London, or in Miami or Los Angeles, I work mostly on my laptop, plug into the interface wherever I’m at, and still have access to the same sounds."

"The Neve 1073 is usually my thing. I mess with that a lot. Also, the EMT^® 140 Classic Plate Reverberator Plug-In — I use those more than anything else. Sometimes I use an API Vision Channel Strip or the Pultec EQP-1A on bass. When I’m recording, I usually track on a Neve board, or at least through Neve preamps. With drums in particular, I usually continue with the Neve aspect within the box, using UAD tools for that as well."

Read the entire article at uaudio.com.