The Phoenix Audio DRS-1R is a 500-Series version of the Phoenix Audio DRS-1. The DRS-1R makes no compromises sonically, or in terms of features compared to its rackmount brother. The DSR-1R uses on-board electronics to boost the +/- 16V rail of the 500 series to +24V to properly power the unit. This preamp features 70 dB of gain, a high-pass filter, and a DI input.
Phoenix Audio DRS-1 Microphone Preamp Features
- With 240V/110V mains voltage input selector switch
- Class A Output specs. See our TF1 Specifications!!
- Output: XLR and TSR 1/4" Jack on rear
- Phoenix Audio's unique Class A, transformerless, True balanced Mic input stage.
- Microphone inputs: XLR's on Front and Rear Panels
- Individual Earth Lift: Push-button switch
Phoenix Audio DRS-1 Microphone Preamp Specifications
- 1U half rack space unit: With 240V/110V mains voltage input selector switch
- Class A (TF1) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB, Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
- Output connections: XLR's and TSR 1/4" Jack on rear
- Phoenix Audio's unique Class A, transformerless, True balanced Mic input stage.
- Microphone inputs: XLR's on Front and Rear Panels
- Individual Earth Lift: Push-button Switches
- Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
- Gain reduction: -20dB pad push-button switch (Mic input)
- High Input Impedance DI: Mono 1/4" Jack on front panel
- Gain Meter: LED Metering. (Green = 0dB, Red= +8dB, corresponding to "4" and "6" on a PPM Meter).
- Phantom Power: Switchable phantom on Push-button Switch
- High Pass Filter: on Push-button Switch
- Phase Reverse: on Push-button Switch
- Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
- Frequency Response: DI Input Stage: -0.3dB @ 40Hz, - 0.5dB @ 25kHz
- Typical Headroom: +24dB on Mic-Pre stage
- DI Stage gain: Maximum of 20dB
No comments:
Post a Comment