Tuesday, June 7, 2011

Dynaudio Acoustics PLM3A Monitor Bundle



The Dynaudio Acoustics PLM3A is a combination of their M3A speakers and a Lab.gruppen PLM 10000Q amplifier with Lake processing for the ultimate solution in speaker management. The PLM3A will provide you with an exceptionally accurate and  loud monitoring system that works well on many genres of music. It would make a great choice for a medium to large studio that caters to a variety of clientele.
MSRP $18,000.


Dynaudio Acoustics M3A main features and specifications 
  • Unique linear phase frequency response
  • Every monitor is matched to any other monitor within ± 1.5dB
  • 28mm ESOTAR soft dome tweeter with aluminum voice coil
  • Dual 150mm magnesium silicate impregnated polypropylene (MSP) midrange drivers with 75mm voice coils
  • Dual 300mm polypropylene bass drivers with exceptionally large 100mm aluminum voice coils, offering dramatic improvements in power handling, bass response and distortion figures over conventional systems
  • Gold plated professional binding posts accepting heavy-gauge speaker cable
  • Heavy internal damping for minimum cabinet resonance
  • Thermal protection of the tweeter
  • Frequency response: 30 Hz – 20 kHz
  • 129 dB SPL @ 1 meter
  • Dimensions: 770 mm (H) x 550 mm (W) x 500 mm (D)
  • Weight: 55 kg.

Lab.gruppen PLM 10000Q main features and specifications 
  • 2350 W per channel @ 2 ohms, 2300 W per channel @ 4 ohms, 1300 W per channel @ 8 ohms**
  • 2 unit 19” chassis weighing only 13.5 kg
  • Input connection: Analog, Digital, Dante
  • Class TD® output stage
  • Regulated Switch Mode Power Supply (R.SMPS™)
  • Copper-finned Intercooler® with transverse-mounted output devices
  • Full suite of protection and fault monitoring features
  • Primary and secondary network connections (for daisy chaining or system redundancy)
  • Digitally controlled ‘amplifier gain’ adjustable in 0.1 dB steps from 22 to 44 dB
  • Digital output attenuation in 0. 25 dB steps from –inf to 0 dB
  • Binding post or Neutrik® Speakon® (1 x NLT8, 2 x NLT4) power output connectors
  • Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL™) adjustable in 0.1 V steps from 17.8 to 153 V
  • Power Average Limiter (PAL)

Lake processing main features and specifications 
  • Raised Cosine Equalization™
  • Linear phase and classical crossovers
  • LimiterMax™ – peak and RMS limiters
  • Iso-Float™ ground isolation
  • Super Module capability
  • Integration of third-party frequency measurement and analysis via Lake Analyzer Bridge
Get more info here.

No comments:

Post a Comment