Fink Analog Audio CS2-FA Overview
Two Complete Channel strips - ready for Dual Mono or Stereo linked use. You can track two different mics through it, or record a stereo pair with it. Loop through it during mix down for that great real analog 'plug-in' (times two.) Link it in stereo as a Bus Processor for vocals, instruments, or percussion groups; or use it as an analog stereo Mastering Processor.
Fink Analog Audio CS2-FA Features
PREAMP | EQUALIZER | LIMITER
A three tube preamp in the vintage Putnam console style, with continuous Gain and Level controls. A passive parametric three-band EQ in the classic Pultec style, with all the familiar frequencies and curves. A unique two tube implementation of the UREI 1176, preserving the FET attenuator character and controls of the original.
Fink Analog Audio CS2-FA Specifications
Two Complete Channel strips - ready for Dual Mono or Stereo linked use. You can track two different mics through it, or record a stereo pair with it. Loop through it during mix down for that great real analog 'plug-in' (times two.) Link it in stereo as a Bus Processor for vocals, instruments, or percussion groups; or use it as an analog stereo Mastering Processor.
Fink Analog Audio CS2-FA Features
PREAMP | EQUALIZER | LIMITER
A three tube preamp in the vintage Putnam console style, with continuous Gain and Level controls. A passive parametric three-band EQ in the classic Pultec style, with all the familiar frequencies and curves. A unique two tube implementation of the UREI 1176, preserving the FET attenuator character and controls of the original.
Fink Analog Audio CS2-FA Specifications
- Bandwidth:10Hz to 50kHz, +/- 1dB
- Maximum Output: +23dBu
- Gain: 80dB
- Equivalent Input Noise: -122dB
Preamp Section - Inputs: Mic, Line, DI
- Input Pad: 0, -10, -20, -30dB, Line
- Gain Control: +/- 10 dB continuous
- Level Control: 0 to 11
Passive EQ Section - Low boost: 0 to +10dB
- Low Cut: 0 to -10dB
- Low Freq: 0, 40Hz, 80Hz, 160Hz, 250Hz
- Mid Boost: 0 to +10dB
- Mid Q: 1 to 10
- Mid Freq: 2k, 3k, 5k, 7k, 10k, 15kHz
- High Cut: 0 to -10dB
- High Freq: 5k, 10k, 15kHz
Limiter Section - Makup Gain: -inf to +20dB
- Input Control: 0 to 11
- Output Control: 0 to 11
- Ratio: 1, SOFT, 4, 8, 12, 20, ALL
- Attack: 0.2 to 20 msec.
- Release: 100msec. to 2.2sec.
- Chassis: 2U x 15.25” deep
- Power: 20 Watts at 120/240 Vac
No comments:
Post a Comment